Local Dewatering Belt Press For Rent In San Diego


Belt-Press Description

Parkson Series 3000 Belt Press Rental in San Diego, CA. This is a 2.5 meter belt press with two 500 gallon poly tanks with dry or liquid poly capabilities and a floc tank with Reeves hand driven motor. Belt Press rentals and thickeners size range from 1.2 meter to 3.2 meter wide belts and are mounted with full polymer, belt was, belt drive and belt tracking systems. A Belt Filter Press is an industrial machine, used for solid/liquid separation processes, particularly the dewatering of sludges in the chemical industry, mining and water treatment. The process of filtration is primarily obtained by passing a pair of filtering cloths and belts through a system of rollers. These belt press systems are commonly used for Sanitation and Sanitation Districts, Water Treatment Plants and Wastewater Treatment Plants. Aspen Rentals provides the highest quality dewatering rental equipment for municipal and industrial clients in San Diego, Coronado, National City, Chula Vista, Lemon Grove, Bonita, La Mesa, La Presa, Spring Valley and all of California.

The Parkson series 3000 belt press rental is mounted on a 36' long skid. It's safety features include handrails, kick plates. emergency stops and all safety guards. The skid contains sufficient electrical cable to make connections within 50' of the unit

Specific Dewatering and Wastewater Management Unit Description:
- 9" screw augur discharging out of the driver side of unit. The discharge auger will drop product 2' away from the edge of the belt press.
- Two 500 gallon poly tanks with dry or liquid poly capabilities
- Progressive cavity poly pump with electrical VFD
- Progressive cavity sludge pump with electrical VFD. The connections are 4" camlock fittings on the passenger side of the belt press
- Floc tank with Reeves hand driven motor
- One boost water pump with a 2"inlet connection on the passenger side of the belt press
- 6" camlock filtrate connections on either side of the belt press
- 4" static mixer complete with poly injection ring and block

Most Belt Filter Press operations can be divided into three general stages - first is the initial de-watering, which makes the sludge pulp; then you have the pressing or medium pressure filtration, which conditions the sludge for high pressure filtration quality; and lastly you have the high pressure filtration, which raises the dry solids content in the sludge cake to the optimum level.

The process begins as the sludge enters the press, where it is mixed with a chemical , either in the press, or in a conditioning tank prior to the press. From this flocculation or preparation zone the sludge enters the gravity drainage zone, where a large rotating drum agitates the floc and drains approximately 70% of the free water. The resulting capture rate can be as high as 99%.

Pressure is first applied in a low pressure wedge zone, which begins squeezing remaining water out of the sludge. Further dewatering occurs in the medium pressure zone, where two large perforated drums of decreasing size apply the pressure. Rollers perform the final dewatering in the high pressure zone. The sludge cake (filtered solids) then exits the machine. The belting on a belt filter press must be continuously washed with clear water to keep it from blinding, and this is accomplished by water spray bars placed above returning belt.

To Learn More About Renting A Mobile Belt Filter Press Please Give Us A Call Today

No matter the size of the dewatering project Vapor Industries can deliver the correct mobile belt press machine rental for your jobesite. Any questions please give us a call

For additional information you can view this item at Aspen Rentals or you can use the contact form below.

   Contact Aspen Rentals
  Please fill out the contact form for additional questions, availability, and detailed pricing.

I agree to the Privacy Policy and Terms Of Use