Birmingham Dewatering Pump Equipment Rentals-BP 1000 Belt Press For Rent-Alabama Wastewater Mobile Belt Press Rental


Belt-Press Description

Birmingham Dewatering Pump Equipment Rentals-BP 1000 Belt Press For Rent-Alabama Wastewater Mobile Belt Press Rental

BP-1000 2.0 Metter Belt Press Rental in Birmingham, AL. This belt press rental is mounted on a 36' 5" long trailer with the sides removed. Belt Press rentals and thickeners size range from 1.2 meter to 3.2 meter wide belts and are mounted with full polymer, belt was, belt drive and belt tracking systems. A Belt Filter Press is an industrial machine, used for solid/liquid separation processes, particularly the dewatering of sludges in the chemical industry, mining and water treatment. The process of filtration is primarily obtained by passing a pair of filtering cloths and belts through a system of rollers. These belt press systems are commonly used for Sanitation and Sanitation Districts, Water Treatment Plants and Wastewater Treatment Plants. Aspen Rentals provides the highest quality dewatering rental equipment for municipal and industrial clients in Montgomery, Mobile, Huntsville, Tuscaloosa, Hoover, Dothan, Decatur, Auburn, Madison, Florence and all of Alabama.

This belt press rental is mounted on a 36' 5" long van trailer which has the sides removed. The safety features include handrails, kick plates, stairs emergency stops and all safety guards. The trailer contains sufficient electrical cable to make connections within 50' if this dewatering unit.

Specific Dewatering and Wastewater Management Unit Description:
-9" screw augur discharging out of the passenger side of this rental unit. The discharge auger will drop products 6' away from the edge of the unit.
-Comes with two 300 gallon poly tanks with dry or liquid poly capabilities
-Progressive cavity poly pumps with electrical VFD
-Centrifugal sludge pump with a fuse disconnected. Mounted on a small skid with 4" camlock fittings
-Floc Tank with Reeves hand driven motor
-One boost water pup with a 2" inlet connection on the drivers side of the unit.
-6" camlock filtrate connection inrear of unit
-4" static mixer complete with polly injection ring and block

Key Specifications:
Stands 12' 9" high, 11' 6" wide, 36' 5" long, 46,500 lbs (including belt press and all ancillary equipment)

Most Belt Filter Press operations can be divided into three general stages - first is the initial de-watering, which makes the sludge pulp; then you have the pressing or medium pressure filtration, which conditions the sludge for high pressure filtration quality; and lastly you have the high pressure filtration, which raises the dry solids content in the sludge cake to the optimum level.

The process begins as the sludge enters the press, where it is mixed with a chemical , either in the press, or in a conditioning tank prior to the press. From this flocculation or preparation zone the sludge enters the gravity drainage zone, where a large rotating drum agitates the floc and drains approximately 70% of the free water. The resulting capture rate can be as high as 99%.

Pressure is first applied in a low pressure wedge zone, which begins squeezing remaining water out of the sludge. Further dewatering occurs in the medium pressure zone, where two large perforated drums of decreasing size apply the pressure. Rollers perform the final dewatering in the high pressure zone. The sludge cake (filtered solids) then exits the machine. The belting on a belt filter press must be continuously washed with clear water to keep it from blinding, and this is accomplished by water spray bars placed above returning belt.

Dewatering system rentals in Birmingham, AL. Aspen Rentals provides belt filter press rentals, polymer skids for rent, rental duriron plate and frame press, gravity belt thickeners for lease, mining belt filter press, skid mounted belt press and meter belt presses. Aspen Rentals is dedicated to providing the highest quality dewatering rental equipment and wastewater treatment equipment rentals for municipal and industrial clients worldwide. They provide high quality mobile belt presses for rent to wastewater and industrial clients nation wide. Their rental fleet contains mobile belt filter press rentals and skid mounted belt filter presses for rent and range from 1.2 meter to 3.2 meter wide belts and are mounted on specially designed trailers or skids. Aspen Rentals maintains, services, rents and leases belt press rentals, conveyer belts, and industrial pumps throughout Birmingham, including but not limited to Montgomery, Mobile, Huntsville, Tuscaloosa, Hoover, Dothan, Decatur, Auburn, Madison, Florence, Gadsden, Vestavia Hills, Prattville, Phenix City, Alabaster and throughout all of Alabama

Aspen Rental also sells the water soluble polymers that are needed to operate belt presses. Making them a one stop shop for your belt press rentals and the polymer solution needed to operate them. Water soluble polymers from Aspen are utilized for oil field friction reducers, oil field drilling solids control, municipal waste, industrial waste, and wastewater treatment facilities around the world.

Aspen Polymers are available in emulsion solution and powder forms for drilling mud/solids separation, dewatering, sewage/sludge, potable water treatment and more most any industry where liquid solid separation treatment is required.

Aspen Polymers strives to offer the top of the line polymer feed system on the market. Only the most durable and weather sensitive materials are used to manufacture their polymer feed system. It has been field tested and allows for the highest degree of micromanagement of polymer delivery to any type of application.

For additional information you can view this item at Aspen Rentals or you can use the contact form below.

   Contact Aspen Rentals
  Please fill out the contact form for additional questions, availability, and detailed pricing.

I agree to the Privacy Policy and Terms Of Use