| |
|
|
| |
More by
Aspen Rentals-Rochester NY Mobile Belt Press
|
|
| |
|
|
|
| |
Equipment Description
Rochester Wastewater Management Rentals-Wide Gravity Belt Thickener Press For Rent-New York Dewatering Rental Equipment
Wide Gravity Belt Thickener Belt Press Rental in Rochester, NY. This wide gravity belt thickener is one of the largest mobile belt presses in the country and sits on a 53' long tri axial single drop trailer. Belt Press rentals and thickeners size range from 1.2 meter to 3.2 meter wide belts and are mounted with full polymer, belt was, belt drive and belt tracking systems. A Belt Filter Press is an industrial machine, used for solid/liquid separation processes, particularly the dewatering of sludges in the chemical industry, mining and water treatment. The process of filtration is primarily obtained by passing a pair of filtering cloths and belts through a system of rollers. These belt press systems are commonly used for Sanitation and Sanitation Districts, Water Treatment Plants and Wastewater Treatment Plants. Aspen Rentals provides the highest quality dewatering rental equipment for municipal and industrial clients in Rochester, Brighton, Irondequoit, Greece, Canandaigua, Newark, Batavia, Geneva, Lockport and all of New York.
At 53 feet long this tri axial single drop trailer is one of the largest mobile presses rental in the United States.
Specific Dewatering and Wastewater Management Unit Description:
- Three belt unit
- Two meter wide gravity belt thickener and 2 meter BDP belt press
- Dual independent control VFD drives on the gravity belt thickener and belt press
- Air conditioned control room
- Over sized pumps and motors throughout.
Most Belt Filter Press operations can be divided into three general stages - first is the initial de-watering, which makes the sludge pulp; then you have the pressing or medium pressure filtration, which conditions the sludge for high pressure filtration quality; and lastly you have the high pressure filtration, which raises the dry solids content in the sludge cake to the optimum level.
The process begins as the sludge enters the press, where it is mixed with a chemical , either in the press, or in a conditioning tank prior to the press. From this flocculation or preparation zone the sludge enters the gravity drainage zone, where a large rotating drum agitates the floc and drains approximately 70% of the free water. The resulting capture rate can be as high as 99%.
Pressure is first applied in a low pressure wedge zone, which begins squeezing remaining water out of the sludge. Further dewatering occurs in the medium pressure zone, where two large perforated drums of decreasing size apply the pressure. Rollers perform the final dewatering in the high pressure zone. The sludge cake (filtered solids) then exits the machine. The belting on a belt filter press must be continuously washed with clear water to keep it from blinding, and this is accomplished by water spray bars placed above returning belt.
For additional information you can view this item
at Aspen Rentals-Rochester NY Mobile Belt Press or
you can use the contact form below.
|
|
Nearby Locations
