505-670-5968

Chicago Belt Press Rental-Illinois Waste Management-Belt Press Rentals

     
   
     

Aspen Rentals-Chicago IL Mobile Belt Press

This company is a nationwide service provider.

Contact For More Info


Click to Call

View All Listings

Delivery Options Delivery Options
Cities We Service Cities Serviced Rental Rates Rental Rates
   Company Website Company Website 


Aspen Rentals-Chicago IL Mobile Belt Press offers equipment Nationwide


     
 

More by Aspen Rentals-Chicago IL Mobile Belt Press


 
     

Belt Press Description




Chicago Belt Press Rental-Illinois Waste Management-Belt Press Rentals

Parkson Series 3000 Belt Press Rental in Chicago, IL. This is a 2.5 meter belt press with two 500 gallon poly tanks with dry or liquid poly capabilities and a floc tank with Reeves hand driven motor. Belt Press rentals and thickeners size range from 1.2 meter to 3.2 meter wide belts and are mounted with full polymer, belt was, belt drive and belt tracking systems. A Belt Filter Press is an industrial machine, used for solid/liquid separation processes, particularly the dewatering of sludges in the chemical industry, mining and water treatment. The process of filtration is primarily obtained by passing a pair of filtering cloths and belts through a system of rollers. These belt press systems are commonly used for Sanitation and Sanitation Districts, Water Treatment Plants and Wastewater Treatment Plants. Aspen Rentals provides the highest quality dewatering rental equipment for municipal and industrial clients in Cook County, Addison, Arlington Heights, Aurora, Aledo, Bartlett, Belleville, Berwyn, Bloomington, Bolingbrook, Buffalo Grove, Carbondale, Calumet City, Carol Stream, Carpentersville and all of Illinois.

The Parkson series 3000 belt press rental is mounted on a 36' long skid. It's safety features include handrails, kick plates. emergency stops and all safety guards. The skid contains sufficient electrical cable to make connections within 50' of the unit

Specific Dewatering and Wastewater Management Unit Description:
- 9" screw augur discharging out of the driver side of unit. The discharge auger will drop product 2' away from the edge of the belt press.
- Two 500 gallon poly tanks with dry or liquid poly capabilities
- Progressive cavity poly pump with electrical VFD
- Progressive cavity sludge pump with electrical VFD. The connections are 4" camlock fittings on the passenger side of the belt press
- Floc tank with Reeves hand driven motor
- One boost water pump with a 2"inlet connection on the passenger side of the belt press
- 6" camlock filtrate connections on either side of the belt press
- 4" static mixer complete with poly injection ring and block

Most Belt Filter Press operations can be divided into three general stages - first is the initial de-watering, which makes the sludge pulp; then you have the pressing or medium pressure filtration, which conditions the sludge for high pressure filtration quality; and lastly you have the high pressure filtration, which raises the dry solids content in the sludge cake to the optimum level.

The process begins as the sludge enters the press, where it is mixed with a chemical , either in the press, or in a conditioning tank prior to the press. From this flocculation or preparation zone the sludge enters the gravity drainage zone, where a large rotating drum agitates the floc and drains approximately 70% of the free water. The resulting capture rate can be as high as 99%.

Pressure is first applied in a low pressure wedge zone, which begins squeezing remaining water out of the sludge. Further dewatering occurs in the medium pressure zone, where two large perforated drums of decreasing size apply the pressure. Rollers perform the final dewatering in the high pressure zone. The sludge cake (filtered solids) then exits the machine. The belting on a belt filter press must be continuously washed with clear water to keep it from blinding, and this is accomplished by water spray bars placed above returning belt.

Dewatering system rentals in Chicago, IL. Aspen Rentals provides belt filter press rentals, polymer skids for rent, rental duriron plate and frame press, gravity belt thickeners for lease, mining belt filter press, skid mounted belt press and meter belt presses. Aspen Rentals is dedicated to providing the highest quality dewatering rental equipment and wastewater treatment equipment rentals for municipal and industrial clients worldwide. They provide high quality mobile belt presses for rent to wastewater and industrial clients nation wide. Their rental fleet contains mobile belt filter press rentals and skid mounted belt filter presses for rent and range from 1.2 meter to 3.2 meter wide belts and are mounted on specially designed trailers or skids. Aspen Rentals maintains, services, rents and leases belt press rentals, conveyer belts, and industrial pumps throughout Chicago, including but not limited to Cook County, Addison, Arlington Heights, Aurora, Aledo, Bartlett, Belleville, Berwyn and throughout all of Illinois.


Aspen Rental also sells the water soluble polymers that are needed to operate belt presses. Making them a one stop shop for your belt press rentals and the polymer solution needed to operate them. Water soluble polymers from Aspen are utilized for oil field friction reducers, oil field drilling solids control, municipal waste, industrial waste, and wastewater treatment facilities around the world.



For additional information you can view this item at Aspen Rentals-Chicago IL Mobile Belt Press or you can use the contact form below.



   Contact Aspen Rentals-Chicago IL Mobile Belt Press
  Please fill out the contact form for additional questions, availability, and detailed pricing.
Name* 
Start Date:
End Date:
Company
Message*
Phone*
 
E-Mail*
 
 
Please enter the number*   3  
 
 

I agree to the Privacy Policy and Terms Of Use





     
 

Related Rental Listings